Touring Unit

The Touring Unit Is Available In The Following Fridge Slide Sizes -

40 Ltr Fridge Slide

False Floor with Access to Spare wheel wind-downYes
Cargo BarrierYes
Soft Luggage RackYes
Single Drawer - 780mm L x 510mm W x 300mm H (Externally)Yes
Side BinNo
Side PocketNo
Full Shelf in 2 halvesYes
40 Ltr H/D Fridge Slide - Internal Tray = 720mm L x 385mm WYes
Drawer TableYes
20 Ltr Water Tank kitYes
Drawer dividerOptional (but recommended)
Fridge tie-down strapsOptional (but recommended)
Fitting and Installation by Fourby FitoutsYes
Interstate shipping/DIY InstallationNo
THIS SYSTEM IS ALSO AVAILABLE WITH NO DRAWER

50 Ltr Fridge Slide

Not available for this vehicle due to width restrictions

60 Ltr Fridge Slide

Not available for this vehicle due to width restrictions

See Below For More Information

Description

The Touring Unit, being our most popular, is designed to multi-layer and divide the rear to allow item to be accessed without having to unpack or double handle items.
This Unit ticks all the boxes, whether it be for long extended trips with a camper/caravan in tow or hitting the Deserts and the High country, vehicle dependent.
It puts your fridge on a heavy duty slide, at a user friendly height, and has enough storage area on top of the drawer and shelf above for larger items and food boxes. The Drawer is big enough to take your compressor kit, and lots more - with the soft luggage rack being a great way to swallow up the sleeping gear, jackets, etc in the roof cavity. The full shelf being in two halves gives you fantastic versatility with space – allowing you to remove either or both sides of the shelf to accommodate your needs in different situations.
With the added advantage you can remove the Fridge slide, shelves and the drawer in about 10-15 minutes, taking you to what we call “Station Wagon Mode” when they are not needed (also known as Soft Luggage Rack kit)
As with all of our Systems - The Touring Unit is Modular and Removable, comes with a 3 Year Warranty, and does not require any drilling of your vehicle.
This means, you can remove the System in part or in its entirety if needed – returning the vehicle back to its original state, without damage.

For the Pajero Sport, we've put in an easy access point in our False Floor so you can still wind-down your spare wheel, without having to remove our System. Ask us for more details!

Note: Our Pajero Sport Systems can only be Fitted and Installed by the Fourby Fitouts team in our factory here in Hallam, Victoria. DIY Installation/Shipping is not available at this present stage.
*The below images are not vehicle specific*

Download the Flyer

For more information, download the Touring Unit flyer

Other Configurations Available